It’s that time of year where usually I am working on Halloween costumes. As I have pulled back on sewing over the course of the past 2 years, I have also found that my desire for making costumes has dwindled. This year, it hit in a different way, as my Fashion Sustainability course has really caused me to consider where in my sewing practices I can make better choices. What has always been clear to me is that sewing things I don’t actually like or won’t actually wear is a waste of my time and materials. A new addition to my thought process is no longer making things that have a sole intended use (like a one season costume that’s be outgrown next year).
I know that dressing up for Halloween is fun for kids, and I get that. I don’t want to be the boring mom who won’t do costumes anymore. I had to come up with a way to make something equally costume and function…and I think I achieved it! For my Fall Favorites look for Project Run + Play this year for my son, I started with the Dress Up Hoodie. It’s a great raglan hoodie with multiple animal options (or you can sew a plain hoodie). The idea I had was to make the butterfly version, but instead of sewing the wings into the seam, I decided to use snaps on them. I also chose to make the hoodie in solid black so he could get plenty of wear with it. Since the wings can snap on and off, he doesn’t have to wear them all the time, and I could also make other wings in the future if I want. I figured it would be a great idea to write up this blog post so that you could do the same! Since I was literally winging it I have some helpful tips, as well as some things to avoid. Anything in bold italics was a mistake or something I figured out after the fact, so pay close attention to those. Let’s get started.
Materials wise, the pattern calls for knit with at least 15-20% stretch. I begrudgingly used some of my highly coveted solid black sweatshirt fleece from Boho Fabrics. I say begrudgingly bc this stuff is awesome and I have no way of acquiring more to replace what I use. For embellishing, fleece was recommended, or felt (though felt doesn’t tend to stand up well to washing). The stores I have near don’t sell fleece and felt just comes in sheets, so I decided to just use broadcloth since I could easily grab it in the colors I needed (I don’t have any of this type of fabric in my stash, unfortunately). Cotton was an okay and not okay choice…you’ll see what I mean as you read through.
For starters, I created a snap panel by adding 1″ from the neckline to the straight part of the wing that would have ordinarily been caught in the seam of the two piece sleeve (shown with the red notch). I forgot that I was lining the wings when I wrote that note at the neckline about adding bias, so you can ignore that part. I used a reference photo of a monarch butterfly and just kinda sketched out the shapes on the wing to my liking, then cut them out to use the cutouts as a template.

l used the cutouts to trace the shapes onto my cotton fabric that I’d be using as the wing base. You do not have to be super precise on this step, as it’ll just serve as your template for placing your cut pieces. I then cut out the wing base using a pinking blade so that it wouldn’t fray a whole lot while I sewed on the shapes. I then use the pattern piece template to cut out my bigger shapes. I have a small rotary cutter so it was easy to do, but you may need to trace them with a marker and then cut them out with scissors. Whatever works for you is all that matters!



Now it was time to place the shapes onto the wing base. I placed them as I cut them so that I wouldn’t be slowed down too much. I also thought this would be the best way to eliminate as much fraying as I could and also avoid any mix up in pieces. I used a fabric glue stick to hold the pieces in place. When I ran out and couldn’t find the replacement cartridges, I switched over the an Elmer’s glue stuck. Do NOT do this! It stayed purple, and I don’t know if it’s because I ironed it or what, but I don’t anticipate it will come out until the wings get washed (which I wasn’t planning to do right away).

Now I had mentioned at the beginning about my choice of cotton being okay and not okay. I think if I had more patience and possibly thought this project through a bit more in advance before I started, I would have ordered enough Wonder Under to help seal the edges a bit more to reduce fraying AND allow me to fuse the shapes in place. That being said, I think it worked okay enough with a small zigzag around the edges, but as you can see below, the pieces did fray and I had to use embroidery scissors to clean it up a lot later. I worry a bit about it fraying even more over time, but I could be overthinking since I don’t sew with this type of cotton very much or do any appliqué work. Any feedback on that would be so appreciated!


My son had a doctors appt and while we were out, he was talking about how it would be cool if it could glow in the dark. I looked it up and saw that Michaels sold a glow puff paint, so we picked some up on the way home. I do not have the most steady hands to it wasn’t the best application, but I did what I could to outline the shapes. DO NOT do this step yet. It takes soooo long to dry and at this point, I still had to add the white spots and also finish cleaning up all the fraying. If you have the same idea, I recommend it being the very last step alllllll the way at the end. I only did these few pictured and then stopped when I realized my mistake.

Next, it was time for a coffee break and to cut out the white spots. I had some fusible felt on hand, so I used that for this step. Could you imagine if I had to clean up all this fray?? I deviated entirely from my pattern drawing and just randomly cut a bunch of ovals of various sizes. I just eyeballed placement, making them kinda symmetrical but not perfect. Happy kiddo stopped in for a “fit” check! Since the spots were fusible, I fused them on, but I also spent the evening stitching around each one. Who knew small round shapes were so tricky to sew?? A machine with a knee lift would have made this go sooo much faster! Do you have one?


A little tip I learned about KAM snaps specifically back in the day was to leave them in a cup of kettle or microwaved water and let them cool down before using. This makes them less tight and much easier to open. Since I was attaching the snaps to knit fabric, this was especially important to me to help prevent ripping a hole in the hoodie by pulling them off too hard. Either way, I always recommend this anytime you’re using snaps for something.

Next step was attaching the main to the liner. I just left about 4-5″ open at the top snap panel area, but sewed the remainder around. I made sure to clip into the center of the wing shapes and snap panel corners so everything turned right side out well.


After I turned it right side out, I stitched all the way around the outside for a neat finish. A couple of the white spots on the bottom got stitched over because they were too close to the seam, so be mindful of this while placing any shapes near the seam allowance. I finished outlining the wings with the puff paint and left it to dry overnight. After this, my back needed a break. First thing next morning, we had to check out the glow-in-the-dark-ness of the wings! Neat!

Since the wings were mostly complete (sans snaps), it was time to sew the hoodie. I used the one piece sleeve instead of the two-piece since I’m not a fan of extra seams (and it wouldn’t be needed since we weren’t attaching the sleeve into it). The only modification I made was to the hood. I reshaped it slightly, skipped a lining, and adding a drawstring casing to it, since the sweatshirt fleece I used is plenty warm and soft.
If you’re good with this next part, perhaps you can do this all on the pattern itself, but since 1) this was my first time sewing this pattern, 2) I didn’t make a muslin, and 3) I hadn’t done this kinda project before, it was easiest for me to mark the snaps with my son trying the hoodie on. I simply pinned the wings on while he wore the hoodie and then transferred the marks to the wings and hoodie. It took a little finagling to get the fabric into my snap pliers but it was a success. I used tiny double folded squares of cotton to reinforce the snaps on the inside of the hoodie. (You can see those in another photo below.)

Here’s the hoodie with all the snaps installed!

Without the wings, it’s a plain black hoodie that he can can still wear on its own. Sure, there are snaps, but maybe I can make some mini accessories he can use? I don’t think he minds anyway lol!


And here we have it…the cutest little monarch butterfly I ever did see. (Complete with a quickly made headband that I managed to make with random things we had around the house). We visited his school, where there are many active monarch caterpillars preparing for their cocoons 🥰 He documented them and I documented him documenting them lol! I intended to grab some pics of the hoodie without the wings attached…but we got sidetracked with the butterflies and talking to one of the teachers at his school. I’m sure you get the gist.






Discover more from Sincerely, Shantelle
Subscribe to get the latest posts sent to your email.



No Comments